Kepler-22b: ¿un planeta con un inmenso océano de agua?

El primer día en la primera conferencia del observatorio espacial Kepler, a la que estoy asistiendo y que tiene lugar en  NASA Ames, cerca de San Francisco, está siendo realmente interesante. Destacaría el resultado presentado por el investigador principal de la misión, Bill Borucki: el planeta Kepler-22b.

Las líneas de distintos colores corresponden a diferentes composiciones: cuanto más abajo del diagrama, mayor es la densidad de los compuestos que dominan. Kepler-22b tiene un radio muy bien determinado, mediante el método de los tránsitos y el uso de curvas de luz (cómo varía la luminosidad de la estrella central con el tiempo). La masa no se conoce, pero su valor máximo debe ser inferior a unoas 32 veces la masa de la Tierra. Por tanto, la composición más probable es agura y material rocoso. Al estar en la zona de habitabilidad, el agua estaría en estado líquido.

 

Destaca entro los más de 600 exoplanetas confirmados hasta el momento por su reducido radio (2.2 veces el de la Tierra), su periodo orbital (290 días, algo menos que un año terrestre), su estrella central (bastante parecida al Sol) y, sobre todo, por estar localizado a una distancia que hace que la temperatura superficial pudiera permitir la existencia de agua en estado líquido (ie, el planeta está en la denominada “zona de habitabilidad”). De  hecho, los modelos indican que en realidad estaríamos ante un planeta con un núcleo rocoso, y con un inmenso océano de una gran profundidad, cientos o miles de kilométros (por comparación, el punto más profundo en un océano terrestre está a solo 11 kilómetros de la superficie), con una presión extraordinariamente alta. Este impresionante océano cubriría toda la superficie del planeta, que, por tanto, carecería de   continentes.  Cuando se tiene en cuenta la masa total del planeta, es probable incluso que la mayor parte del planeta sea eso: agua en estado líquido. Debido a que no se  ha establecido todavía su masa, la composición del planeta, que de determina por métodos indirectos, no se conoce.

Comparación de las zonas de habitabilidad del Sistema SOlar y de Kepler-22. Crédito NASA/AMES/JPL-Caltech

Entre otros descubrimientos, están los 48 candidatos tipo tierra (planetas rocosos) que también están localizados en la zona de habitabilidad. Pero su confirmación y caracterización requerirán bastante trabajo por parte de la comunidad científica.

 

Compartir:

72 comentarios

  1. Muy interesante noticia, muchas gracias.

    Pero no entiendo una cosa. Si en el enlace de la NASA sobre Kepler22-b señalan que todavía no saben si su composición es rocosa, gaseosa o líquida, ¿no es un poco aventurado publicar que lo más probable es que este exoplaneta esté recubierto completamente por agua líquida, si la propia NASA no se atreve siquiera conjeturar sobre ello? Al menos no públicamente.

    Un saludo, y ánimo con la web, que está muy bien.

  2. Ap. Setup is an offline website that you will be able to use only when you are connected to your Wavlink Extender Setup page. So, it doesn’t matter if you have a repeater, a modem, an outdoor access point, and so on, all you have to do is connect to the network and then access the login tab.

  3. mywifiext is local path to open genie setup configuration .When the user accesses this mywifiext.net on the web browser to set up a wireless adapter ,it shows an error message due to complications or is unable to compare to the domain
    or visit website : https://mynewextsetup.us/

  4. mywifiext is local path to open genie setup configuration .When the user accesses this mywifiext.net on the web browser to set up a wireless adapter ,it shows an error message due to complications or is unable to compare to the domain

  5. Do you want to set up the extender using your mobile device?, Then, you are on the right page. Here all are explained, How to Setup D-LINK DAP-1330 Extender Using Your Mobile Device? For this, you just need an iOS or Android smartphone or tablet.

  6. Take a look at how you can set up using a Wi-Fi router to get internet access for the network devices. Choose if you want to use the IQ Setup Wizard for detecting the internet connection type or simply enter the settings manually.

  7. Hello friends I am Kim Brown and I like to create useable website and recently I have created a website guestpost website it has high DA and zero spam score so you can share your thoughts and ideas here easily and create backlinks also.

  8. You can login netgear extender admin with using IP address. Try out the IP address in web browser and complete the login process with the help of username and password. You can simply type http://www.192.168.1.250 default IP for netgear extender login. Thanks for the post.

  9. naturally like your website however you need to check the spelling on several of your posts. Thanks for publish this. You can resolve the netgear issues with our help. We will provide the netgear_ext login configuration for you.

  10. If you are looking for how to fix the issues of setek setup , then no need to worry; go to our website or contact us. Our experts are experienced and can help to resolve your problems.

  11. Thanks for sharing the most important information. we provide technical support. If you need any issues regarding mi camera setup visit our website.

  12. If you don’t have any TP-Link ID, then tap on Sign up. The rest will be guided to you by the app on-screen instructions. If you face any difficulty , then you can visit us .

  13. А hаrd reset, unlike the nоrmаl роwerwаsh, restоres bоth the sоftwаre аnd hаrdwаre соnfigurаtiоns оf yоur Сhrоmebооk tо the fасtоry defаult settings. It uses the Сhrоmebооk Reсоvery Mоde tо fасilitаte the reset орtiоn.

  14. The Roger email is the best & most service for sending the documents to other parties. But if you wish to send the documents then you need to require the email account login. Here are some rogers email login steps.

  15. If you think about the ASUS ZenWiFi mini Mesh login, But you don’t know how to log in to it. So, you do not need trouble with this, just follow the given point and login to your mesh.

  16. For the setup of your dlink router via WPS , place the extender in the same room as your main Wi-Fi router. Connect it to a power supply. Now press the ‘WPS’ button present on the side of the extender. Within 2 minutes, press the ‘WPS’ button on the router. Wait for the LED to turn to a green color.

Deja un comentario